How To Make A Home Gym Pulley System

It’s crucial to have a homemade pulley system in your home gym. You can get the best exercises without going to the gym because it uses a variety of muscles. The top home gym equipment enables you to carry out a variety of activities.

The first two exercises that come to mind when thinking about cable pulleys are triceps and back. The triceps pushdown and lat curl are just two of the exercises you might perform, though.

The good news is that it’s easier than you might think to construct your own cable pulley machine. How to make a home gym pulley system? Assembling or disassembling a home gym is always a difficult task. Choosing how to disassemble home gym equipment is a challenge. Continue reading if you want to improve your strength training in the convenience of your home gym.

3 DIY Pulley Systems:

How To Make A Home Gym Pulley System
credit: https://www.wikihow.com/Build-a-Pulley

There are three DIY pulley systems:

  1. The Super Simple DIY Pulley
  2. The Homemade Tricep Pulldown
  3. DIY Cable Crossover With High & Low Pulley Setup

What Is A Cable Pulley Machine? 

The cable pulley machine is easy to create at home and utilize. It may be used with a range of various exercises and is made to help you tone your muscles. The resistance settings let you alter the level of difficulty of your workout. 

Although there are more straightforward alternatives, these machines are among our favorites for home gyms. You can perform a variety of exercises, such as:

  • The Standing Shoulder Press 
  • Wood Chop 
  • Glute Kickback

With this training equipment, you may do a wide range of upper- and lower-body workouts.

However, not every household can accommodate cable crossover devices. Making your own, however, enables you to customize it for your room.

Why Build A Cable Pulley System In Your Home Gym?  

credit: https://garagegympro.com/diy-pulley-system-home-gym/

Your home gym gains a lot of value from a cable pulley system. You’ll be able to exercise more frequently and develop stronger muscles. It’s okay if you can’t afford to get one! Even better, you may construct a cable pulley at home.

  • Cable Machines Are Versatile:

You may perform a wide variety of exercises using your cable pulley system. You can try exercises such as rows, chest presses, and bicep curls. You can get the full workout at home because they even train your upper and lower bodies.

  • Hit Angles Other Gear Can Miss:

When you lift weights, one spot on your arms is pounded repeatedly. By changing things up, you’ll be able to strengthen additional areas of your body. Even your abs can be built using this technique since weights can’t effectively target that area.

  • Provide Constant Resistance:

Your body is always using a pulley. The resistance is the same as you raise and lower your arms. That implies that you’re constantly exerting yourself under pressure.

  • Beginner Friendly:

And lastly, these cable pulleys are incredibly user-friendly for beginners. With these, you can do various beginner-level workouts, and they’re easy to use. As you gain experience, you can move on to more challenging ones.

Pick your location:

You must first choose the location of your pulley system before building it. The top of the crossbar on a squat rack would be the ideal location. Use a doorway pull-up bar instead of a rack if you don’t have one; if it can support your body weight, it can support your pulley system.

If you have a sturdy spot to mount a hook screw or a second-floor joist, you can also hang it from your ceiling. But beware—you’ll need to keep the weight small to avoid pulling out the screw and maybe damaging your ceiling. 

Once you have chosen a spot, measure the area there from the ground up. You’ll need that many feet of cable, so have that figure handy on paper or in your phone. When you put it up, there will probably be too many cables, but it’s better to be safe than sorry by cutting the unnecessary cord off.

Items List:

Remember that the caliber of your system will depend on the caliber of your products. You can choose the least expensive choice, but because you’ll probably need to replace parts, you might as well get the highest quality you can afford.

The $20 pulley that you can see in the photographs can support more than 500 pounds, so I know it will be helpful for whatever I use it for. There are less expensive choices available, but make sure they have been tested with the weight you want to employ.

  • ¾ inch iron pipe flange
  • ¾ inch x 12-inch iron pipe straight piece (nipple)
  • ¾ inch iron pipe tee
  • 3/16 coated cable (also known as wire rope)
  • 1 pair of wire cutters
  • 2 rope clamps
  • 1 pulley with a hook or loop on the top
  • 1 hook screw or 1 chain (3 feet) (depending on where you hang)
  • 2 carabiners

Building Steps for DIY cable machine:

  1. Using your wire cutters, divide the galvanized wire in two.
  2. Beginning in the middle of the wire, wrap it around the pipe handle’s midsection. Twist the ends around the wire to ensure it is extremely tight.
  3. Make a knot at the end of your rope. After that, melt the knot with the lighter. This keeps it from releasing its knot.
  4. Wrap the second knot around the first one. It should be attached with an S hook.
  5. Put your pulley high in the air. It works great to use garage door bars or even tall tree branches.
  6. Use your pliers to tightly wrap the remaining wire after passing it through the pulley. Make sure the fit is snug and that you won’t be poked by the wires.
  7. Through the pulley, pass the nylon rope. Next, knot it, and use your lighter to melt it. As a result, the rope cannot escape the pulley.
  8. After you tie the first knot, tie another one behind it and wrap it around your carabiner.
  9. Take the handle with the wire loop protruding; you can quickly attach your carabiner to it.

DIY Tricep Pulldown Machine:

You’ll require:

  • a swivel pulley only
  • To connect the pulley, use one pull-up bar or another bar.
  • PVC Pipe That Fits Around Your Bar For One Foot
  • Rope 30 Feet Long
  • To handle a heavy weight or another object, use one short rod.

Building Steps:

  1. Slide the hollow PVC pipe over the bar to secure the pulley to it. The bar won’t break as a result of this.
  2. Cut the rope at one foot. Make use of this to secure the swivel pulley to the pull-up bar. Make use of a strong knot.
  3. To hold the weight on the other side of the pulley, cut a length that will fit through the pulley. Your rope should pass through the pulley.
  4. Put a knot in the rope and fasten your belt to the other end. Since you don’t want to drop heavy objects too forcefully, they should be sturdy.

Using it:

Slide one plate onto the base after untying your tee from your base. You have the option of using Olympic or regular weights. Secure the tee on top after your weight is on the base. Put your attachment to the cable’s other end. 

If you have a specific cable attachment, it can be a rope, straight bar, or other objects. Either thread it through the loop or attach it to the carabiner.

Holding the attachment, start with simple tricep pushdowns. Once you’ve completed a few repetitions, practice lat pulldowns while seated or lying on the floor. 

Finally, carry out whatever additional workout you wish to undertake with your system. Use a controlled rep speed every time. Jerking the cable will cause the weight to swing, which could cause damage. Once you are comfortable with your system, repeat the previous procedures while adding a small amount of additional weight (5–10 pounds at a time). 

You should never reach your maximum with any exercise. If you have to use a hook screw, concentrate more on performing controlled repetitions. If you have a pullup bar or rack, you can lift a little more weight while keeping an eye on how your body is handling it. 

You can begin adding exercises to your home fitness program after you are comfortable with your system.

Conclusion

At-home pulley systems are fantastic. How to make a home gym pulley system?  They are easy to manufacture as a do-it-yourself project, perfect for all skill and strength levels, and they build muscle. You may make your own for a reasonable price to add one to your home gym.

There are three diy pulley systems: The Super Simple DIY Pulley, The Homemade Tricep Pulldown, DIY Cable Crossover With High & Low Pulley Setup. These systems will help you to make pulleys at your home gym. You just need to know which one is affordable. Many people are unsure about how much does a home gym cost.

FAQ’S

Can you build a rolling pulley system for the garage?  

The first approach we discussed above does indeed apply to a garage. Frequently, wood is left uncovered or in the open in garages. These beams are ideal for utilising in conjunction with a pulley system.

Do cable weights work well for gaining muscle?

Yes, they work wonders. With the constant strain they place on your muscles, there is no time for rest. Because of this, using it is quite effective.

What Is a Pulley System for a Home Gym?

A home gym pulley system can be as simple as a rope and weight looped over a pull-up bar. Free-standing pulley systems and wall-mounted pulley machines are even more common. 

A pulley machine is a cable machine with a series of weights that relies on a pulley wheel to operate.

How Tonal Modernized Home Gym Pulley Systems?

Tonal is a smart home gym that’s been redesigned for the 21st century. Digital weight system uses an electromagnetic motor to deliver 200 pounds of resistance. It intuitively adapts to you in real-time. Tonal has a vast library of on-demand workouts and programs in the app. In-depth progress tracking shows how much volume you’ve lifted, and how your Strength Score improves over time.

Spread the love