The NordicTrack treadmill is one of the best treadmills to reach your fitness goals without any hassles. It helps you burn your calories quickly and provides you with superb cushioning, especially in case of joint problems. Sooner or later the NordicTrack treadmill undergoes a few technical issues where you need to reset it.
You may face problems with the treadmills’ engine signal, speed sensor, or console settings. You can fix all these issues with great ease if you know how to reset the NordicTrack treadmill.
This article will educate you about how to reset your treadmill by employing different methods.
Read more: How to Reset NordicTrack Treadmill
Guideline for Resetting your NordicTrack Treadmill
The NordicTrack treadmill can be reset by applying two basic different methods. Either you can reset it with a reset button or without it. You need to follow different steps in each case.
This guideline will enlighten you about the steps that you need to take for resetting your treadmill. It will also inform you about the problems that you may face after resetting. So, let’s begin.
Steps for How to Reset NordicTrack Treadmill with a Reset Button
If your NordicTrack treadmill has a reset button; then, follow these simple steps given below:
Step#1: Remove the power plug
The first step is to unplug your treadmill from the power line. Simply put; just remove the power plug and make it detached from your treadmill. You can also switch off the power button so that the power supply gets disrupted.
Remember that the reset process cannot be done until you unplug the power plug. It is also important to keep yourself safe from any potential threats that may arise if you keep the power button on.
Step#2: Locate the keyhole
The NordicTrack treadmill ensures users’ safety and by all means, it does not work without keys. At this step, you need to locate the keyhole and insert the safety key. The console program of the treadmill will get readily activated.
Step#3: Finally, locate the reset button
After you activate the treadmill’s console program; you will find a reset opening at the bottom of the console’s display. At this step; you need to plug in the power plug so that it can be restarted. Afterward, activate the reset button.
Once the treadmill gets restarted; you need to click on the reset opening button to press the reset button. When it’s done, your NordicTrack treadmill’s setting and the console will be restarted.
Resetting Process of a NordicTrack Treadmill without a Reset Button

For NordicTrack treadmills having no reset buttons; the following steps will help to reset the treadmill. Also, you can still follow these steps even if your treadmill has a reset button but you are unable to locate it. The steps are:
Step#1: Remove the safety key and press the control buttons
First of all, you need to remove the safety key. It is crucial to remove the inserted keys otherwise the reset process will not be done successfully. After it’s done; the next step is to press the control buttons.
Locate the speed + button and stop buttons. Press and hold them simultaneously. If you fail in doing this attempt; there is nothing to worry about because you can try it again.
Step#2: Insert the keys again and reset the incline settings.
Make sure that you press and hold the speed + and stop buttons again and again. At this step, you need to insert the safety keys again. Afterward, turn on your treadmill.
Now, you can release the speed + and stop buttons when the safety keys have been inserted. Make sure you have turned them on.
Step#3: Reset your treadmill’s incline settings.
The incline settings can be easily reset once you have pressed the stop button. After you do this; press the stop button first. Then, press the incline + button and here you go.
The incline settings will go up. Now, you need to press the incline – button to make your incline settings go down.
Step #4: Reset your treadmill
Follow the previous steps for resetting your treadmill. The preceding steps help you to reset your console and incline settings. However, if you still find some problems, it is recommended to remove the safety keys once again.
And finally, try one more time to reset your treadmill.
Problems that may arise after Resetting
Even after resetting; you may still find some problems with your NordicTrack treadmill. This can mainly happen because of some hardware issues.
However, the minor issues can be fixed by yourself and you just need to know about them. Here is the list of things that you need to check after resetting your device:
- Do not forget to check your treadmill’s main harness. Locate it especially if you find any loose connections or brakes in the wire.
- If you find no problems with the wire then switch the black and red wires. Do this to see whether the harness wire is working properly or not. These wires are located on the terminal blocks of the incline motor.
- If the black and red wires go down then pay special heed. It is an indication that enough voltage is not available for the incline motor on one side. If you come across such an issue; fix it as soon as you can.
- You can also use a multimeter to know whether your incline motor is getting enough voltage or not.
- Also, check the voltage lines of the console to and from the motor board.
Conclusion
Never hesitate to reset your NordicTrack treadmill especially if the machine stops working. It is always good to have a manual so that you can apply the manufacturer’s instructions. But if you do not have it; still, there is nothing to worry about. This article is right there to facilitate you.
We not only inform you about How to Reset NordicTrack Treadmill but also focused on the problems after resetting. If you repeatedly find problems with your treadmill; then, do not forget to scroll up the given guideline. Happy learning.